7.22. The involving starter relay - removal and installation

1. Disconnect a wire of the minus plug of the accumulator.
2. Remove a starter.

21.3 For removal of the involving relay from a starter turn off a nut and disconnect a wire (it is specified by an arrow)...

3. Disconnect a big wire from the relay (21.3).

21.4... then turn off fixing screws of the relay (are specified by shooters) and remove the relay from a starter

4.  Turn off  screws,  the fixing relays to a starter (21.4).
5. Remove the relay from a starter.
6. Installation is carried out upside-down removals.