03bf454c

7.12. Check and replacement of the reception Cordia/Tredia 1.8L Turbo coil [1984 and 1985); Colt, Lancer, Mirage 1.6L (1985)

1. Uncover the distributor and a rotor.
11.2 On the Cordia/Tredia 1.8L Turbo models (1984 and 1985); Colt, Lancer, Mirage 1.6L (1985) use special plugs for check of resistance of the reception coil
1. Plugs for check of resistance of the reception coil

2. Check resistance of the reception coil by means of an ohmmeter (11.2).
12:7ú Elements of the distributor of the Cordia and Tredia 1.8L Turbo (1984-1985) and Colt, Lancer, Miracie 1.6LM9851 models

1. Plug of an air vent
2. Cover 3 Piece of coal 4. Rotor
5 Springs of the centrifugal regulator
6. Plate of the centrifugal regulator
7. Small weights of the centrifugal regulator
8. Basis of the centrifugal regulator
9. Alarm rotor 10 Reception coil 1 7. Igniter
12 Breaker
13 Plate
14. Washer
15. Axis
16. Bearing
17. Epiploon
18. Case
19. Sealing ring
20. Pin
21. The conducted gear wheel
22. Vacuum proofreader

3. Replace the coil if resistance differs from specified in the section of technical characteristics (12.7g).
Cordia/Tredia 1.8L Turbo (1986-1988); Colt, Lancer, Mirage 1.6L (1986-1988)
12:7ó Elements of the distributor of the Cordia and Tredia 1.8L Turbo (1986-1988) and Colt, Lancer models,
Mirage 1.6L (1986-1988)
1. Plug of an air vent
2. Cover
3. Piece of coal
4. Rotor
5. Casing
6. Sealing ring
7. Cutting lock ring
8. Vacuum proofreader
9. Screw
10. Screw
11. Alarm rotor
12. Screw
13. Reception coil
14. Stator
15. Rotor axis
16. Pin
17. Fastening of springs
18. Springs of the centrifugal regulator
19. Small weights of the centrifugal regulator
20. Pin
21. The conducted gear wheel
22. Sealing ring
23. Axis
24. Epiploon
25. Case

4. Check resistance between a wire of primary coil of the distributor (12.7v) and replace the reception coil if it is necessary.
Cordia/Tredia 2.0L (1986-1988)
12:7í Elements of the distributor of the Cordia and Tredia 2.0L (1986-1988) models

1 Cover
2 Rotor
3 Casing of the generator of signals
4 Reception coil
5. Plate of the centrifugal regulator
6. Igniter
7. Igniter casing
8. Vacuum proofreader
9. Consolidation
10. Axis of an alarm rotor
11. Cap
12. Springs of the centrifugal regulator
13. Small weights of the centrifugal regulator

5. Disconnect wires of the reception coil (12.7b) and check resistance between coil plugs.