03bf454c средство от мучного жучка
стенд ап тнт

6.2. General description

Models with the carburetor engine
On these models the power supply system consists of the fuel tank, two fuel filters, the fuel pump, the air filter and the two-chamber carburetor.
The carburetor with system of feedback (FBC) used on models of 1984 of release later is controlled by an electronic control unit which monitors changes in operation of the engine by means of various sensors, compares the obtained data with the parameters which are stored in memory and respectively changes supply of fuel by means of the electromagnetic valves installed in the carburetor.
Models with electronic injection of fuel
Models with multipoint injection of fuel (MPI)
The power supply system of these models consists of the fuel tank, two fuel filters, the electric fuel pump, the regulator of pressure of fuel, the electromagnetic valve of adjustment of pressure, a fuel collector, injectors and the air filter.
The electronic control unit obtains information on operation of the engine from various sensors and respectively changes a period on which the injectors located in each of cylinders open.
Models with point-to-point system of injection of fuel
The power supply system consists of the fuel tank, two fuel filters, the electric fuel pump, the regulator of pressure of fuel, two injectors and the air filter.
The electronic control unit obtains information on operation of the engine from various sensors and respectively changes a period on which the injectors located in the block of throttles open.
System of production of the fulfilled gases
On all models the system consists of a final collector, the forward catalytic converter, the back converter, a connecting pipe between them and the muffler.