5.15. A reception tube of the conditioner - removal and installation
Attention! The air conditioning system is under big pressure. Until the system is not discharged at the station, it is impossible to make replacement of details. Use goggles when replacing details of the air conditioning system.
Removal
1. The reception tube of the conditioner is placed in a forward compartment of the engine.
|
14.2 Components of a reception tube of the conditioner.
1. Pressure relay.
2. Air conditioning system tubes.
3. Bolt.
4. Viewing window.
|
2. Disconnect the connection socket from the relay of pressure (14.2).
3. Disconnect two tubes of air conditioning system from a reception tube.
4. Immediately isolate open sites of the air conditioning system to avoid hit of dirt and moisture in system.
5. Turn off fixing bolts and pick up the reception phone from the car.
Installation
6. Establish new rings and oil them.
7. Installation is carried out upside-down removals.
8. If the reception tube of the conditioner is established, add 10 g of oil.
9. Check pressure and tightness of the air conditioning system.