03bf454c

5.13. The air conditioning system and heating - replacement, installation of wires.


12:4á Fasteners of a control rope.
1. Tube
2. Clip
3. Plug
4. Rope
5. Emphasis
6. Pin of the choice of the mode of functioning of a heating system of back glass.


12:4í Air recirculation rope Fasteners
1. Tube
2. Arm of fastening of a rope
3. Lever of system of recirculation of air
4. Pin of the choice of the mode of functioning of the air conditioning system.
5. Rope
6. Clip


12:4ó Details of fastening of a temperature rope
1. Tube arm.
2. Tube.
3. Clip.
4. Plug of fastening of a rope.
5. Rope.
6. Pin of the choice of the mode of functioning    of system of heating and cooling.
7. Water supply lever.


Replacement
1. Disconnect a wire of the minus plug of the accumulator.
2. Remove the panel of finishing of an instrument guard.
3. Remove a glove compartment and covers of the console.
4. Remove clips from ropes, disconnect ropes from a hairpin of a control lever and disunite them.

12.5 Screws of fastening of the control unit of the air conditioning system and heating (are specified by shooters).


5. Turn off fixing screws, the control unit    of the air conditioning system  and  heating (12.5).
6. Disconnect devices from the panel.
7. Installation is carried out upside-down removals.
Installation of ropes

12.8 For replacement of a rope the lever of system is installed in the heating mode.
1. 8 mm.
2. Standard position of the lever.


12.9 For replacement of a rope the lever of system of recirculation of air is installed in the mode of shutdown of the fan.
1. 53 mm.          
2. Standard position of the lever.


This procedure is shown in figures 12.8, 12.9 and 12.10.

12:10 To replace a rope, it is necessary to install the temperature lever in extreme left situation
1. Standard position of the lever.              
2. 8 mm.


Ventilating and heating rope
8. Include system of heating (12.8). Install the lever on the minimum level of heating, attach a rope to the lever and replace a clip.
Rope of system of recirculation of air
9. Switch off the fan (12.9). Install the lever on the minimum level of ventilation, attach a rope to the lever and replace a clip.
Rope of regulation of temperature
10. Install the lever of system of heating in the left situation, install the lever of the water gate on the maximum level, attach a rope to the lever and replace a clip (12.10).