4.10. A head of the block of cylinders - dismantling
1. Remove axes of yokes and a yoke.
9.2 For storage of elements of the valvate mechanism use small plastic packages of the corresponding tag not to mix elements at installation and to install all valves on the places.
|
2. Before removal of valves prepare plastic bags for their storage (9.2).
9.3 By means of the compressor of springs squeeze a spring, then remove croutons
|
3. Squeeze a spring of the first valve and remove croutons (9.3). Accurately release a spring and remove a plate, a spring and a saddle of a spring.
9.4 If the valve is not removed, grind area around a flute on a valve rod a file
|
4. Remove the valve and an epiploon. If the valve is not removed, remove a facet around a flute on a rod of the valve (9.4).
5. Similarly remove other valves.
9.6 Unscrew valves of an admission of the rarefied mix by means of the special Mitsubishi MD998310 tool or a deep head
|
6. If it is necessary, remove valves of an admission of the rarefied mix (9.6).
9.7 Squeeze a valve spring by means of the N MD998309 tool
|
7. For removal of the valve squeeze a valve spring by means of the special tool (MD998309) (9.7), remove croutons, a plate and a spring.
8. Remove consolidations from a valve rod.
9. After removal of valves clear and examine a head.