03bf454c

3.17. A back epiploon of a bent shaft - replacement

1. Remove the transmission from the car.

16:2á Bystry method of replacement of an epiploon (1,5 l)


16:2í Oil an epiploon pure engine and accurately hammer it into place


2. The epiploon can be replaced, without removing the oil pallet and fastening of an epiploon. This method is not recommended as you can damage an epiploon in installation time. If you want to risk, take an old epiploon (16.2a). Oil an epiploon pure engine and accurately hammer it into place (16.2b).
3. For safe replacement of an epiploon the following method is recommended
4.  Remove the oil pallet, unscrew bolts, remove fastening of an epiploon and laying of fastening.

16.5 Arrange fastening of an epiploon on two wooden whetstones and beat out an old epiploon


5. Arrange fastening of an epiploon on two wooden whetstones and beat out an old epiploon (16.5)

16.6 Establish a new epiploon


6. Establish a new epiploon (16.6).
7.     Oil an epiploon pure engine. Establish new laying of the holder.
8. Establish an epiploon on a bent shaft.
9. Tighten bolts of fastening of an epiploon.
10. Establish the remained details.
11. Start the engine and check it for existence of leaks.