03bf454c

2.40. Replacement of the sensor of content of oxygen


39.1 Before removal of the sensor of content of oxygen (1), disconnect a wire from the socket of connection (2), unscrew bolts (3) and remove the heat-shielding screen of a final collector


1. Disconnect a sensor wire from the socket of the connection located behind the top left corner of a radiator and remove the heat-shielding screen (39.1).
2. Unscrew the sensor of content of oxygen and reliably twirl the new sensor.
3. Install the heat-shielding screen into place, and reliably tighten fixing bolts.
4. Connect the connection socket.