2.18. Replacement of the air filter and filter of system of ventilation of a case
Models with the carburetor engine
|
17.1 It is possible to uncover the air filter, having released clips of a cover on each side and having turned off a nut lamb from above
|
1. The air filter is located from above the carburetor and for its replacement it is necessary to turn off a nut lamb, to disconnect clips and to uncover (17.1).
|
17.2 Get the filtering element and wipe an internal surface of a casing of the air filter
|
2. Get the filtering element and wipe an internal surface of a casing of the air filter (17.2).
3. Establish the new filtering element.
|
17.4 Get the filter of system of ventilation of a case from a casing
|
4. The filter of system of ventilation of a case is located in a casing of the air filter, and for its replacement it is necessary to uncover the filter and to get the basic filtering element (17.4).
Models with electronic injection of fuel
5. Disconnect the socket of connection of the sensor of a stream of air and disconnect an air supply hose.
|
17:6á Disconnect clips
|
|
17:6í Accurately get the air stream sensor from a casing
|
7. Replace the filtering element and install the sensor into place.
|
17.7 Remove the filtering element
|