03bf454c

2.11. Check and adjustment of a free wheeling of a pedal of coupling

1. Press on a pedal of coupling and check the size of its free wheeling.
2. For adjustment of a free wheeling of a pedal in a motive compartment tighten up the adjusting nut of a braid of a rope (located in the place where the rope passes through a back wall of a motive compartment) so that the gap between a nut and the acting part of the isolation center was such as it is specified in the section of technical characteristics.
3. Again check a free wheeling of a pedal of coupling and carry out repeated adjustment if it is necessary.

10.1 For check of a free wheeling of a pedal of coupling measure distance between the usual provision of a pedal and situation when the pedal begins to show resistance


10.2 Adjustment of a free wheeling of a pedal of coupling is carried out by a podkruchivaniye of an adjusting nut to receive the required gap (C)
1. Adjusting nut 2. Insulator