03bf454c

15.8. The combined switch - removal and installation

1. Disconnect a wire of the minus plug of the accumulator.
2. Remove a steering wheel.
3. Remove a casing of a steering column and the lower casing.

8.4 On the models Colt, Lancer, Mirage of early years of release fixing screws are located from above (are specified by shooters), remove a clip,
located in deepening of a steering column, before removal of the switch



4. Turn off fixing screws (8.4).
5. Cut off fastenings of a plait of wires, disconnect the socket of connection and remove the switch from a steering column.
6. Installation is carried out upside-down removals.