03bf454c

15:10. Headlights of head light - adjustment

1. Headlights of head light have two adjusting screws, one is located from above headlights and controls the vertical direction of a beam, and one is located
sideways headlights are also controlled by the horizontal direction of a beam.
2. For adjustment of headlights install the car on a plain surface in 10 meters from a wall or the screen.
3. Paste vertical strips on a wall on the center of the car and for the center of headlights.
4. Paste a horizontal strip on a wall also on the center of headlights.
5. When carrying out adjustment the car has to stand on a horizontal surface, the fuel tank has to be half filled, and the luggage carrier of the car should not be overloaded.

10:6á The Arrangement of adjusting screws on headlights of the closed type
and. The adjusting screw for adjustment across
. The adjusting screw for adjustment down



10:6í On the Precis models of 1989 of release earlier, on which headlights of head light with the replaced bulbs are established, the top adjusting screw (N) regulates a headlight across, and the lower adjusting screw (V) - down



6. Include headlights of passing beam and adjust the provision of headlights so that the light spot was 5 cm below than the horizontal line and is 5 cm more right than the vertical line. For adjustment of headlights of the closed type down, tighten up the adjusting screw located from above headlights (10.6a). The adjusting screw located sideways is used for adjustment across. On models with headlights with the replaced bulbs adjusting screws can be located in various places (10.6b and 10.6v).

10:6ó The Arrangement of adjusting screws on the model Colt, Lancer, Mirage
A. The adjusting screw for adjustment across B. The adjusting screw for adjustment down



7. Turn on driving beam of headlights. The light spot has to be directly under the crossing of lines on a wall.
8. After independent adjustment of headlights of head light address experts for exact adjustment as soon as possible.