03bf454c

14:16. Glass of doors - removal and installation


16:1á Elements of fastening of glass of a forward door on models of early years of release
1 Finishing panel
2 Protective film
3 Glass
4. Laying
5. Guide
6. Regulator



16:1í Elements of fastening of glass of a forward door on models of late years an extract
and 
Models with the power window
1   Panel of finishing and protective film
2 Glass
3 Fastenings
4 Regulator
Models with a mechanical window regulator
1 Panel  of finishing  and  protective film
2 Glass
3 Fastenings
4 Regulator
in Model with the power window of of Model with the mechanical window lift



1. Remove the panel of finishing of a door and a protective film (16.1a and 16.1b).
2. Lower glass.

16:1ó Elements of fastening of glass of a back door of models of late years of release
1
Finishing panel
2 Protective film
3 Dividing strip
4 The fixed glass
5 Consolidation
6 Glass
7 Laying
8 Guide
9 Regulator



3. On some models on a back door it is also necessary to turn off fixing screws, to remove guides and back triangular glass (16.1v).
4. On models of early years of release make marks around fixing bolts of guides of glass and turn off them.

16:5á On forward doors of some models it is necessary to remove decorative strips before glass removal
1.
From the inside
2.
From outer side



16:5í Incline glass as it is shown in the drawing at removal of glass from a door



5. On some models on a forward door it is necessary to remove decorative overlays from above of a door (16.5a). Remove glass from a door (16.5b).
6 If it is necessary, turn off fixing bolts of the regulator and remove the regulator

16.7 Measure distance between a back edge of glass and an opening on a glass guide before removal of glass from a guide



7 Installation is carried out upside-down removals (16.7)
8 If it is necessary to adjust the provision of glass, turn off fixing screws