03bf454c

14:15. A latch, a drum of the lock and the handle - removal and installation

1 Remove the panel of finishing of a door and protective to a pla a nka.
2. Remove glass.
Latch

15:3á Elements of the lock of a door of models with the rising external handle
1. Finishing panel
3. Plastic covering 3. Socket
4. Clip
5. Clip
6. Draft of the external handle
7. Lock
8. Clip
9. Internal handle
10. Draft of an internal latch
11. Draft of the internal handle
12. Fixing clip of a drum of the lock
13. Drum of the lock
14. External handle



3 Disconnect safety draft and draft of the internal handle from a latch (15.3a and 15.3b)
4 Turn off three fixing screws and remove the lock
5  Installation is carried out upside-down removals
Drum of the lock

15.6 Disconnect draft of a drum of the lock (1) from a drum of the lock, then by means of flat-nose pliers remove a fixing clip (2) from a drum of the lock (3)



6. Disconnect draft of a drum of the lock from the reel (15.6).
7. By means of flat-nose pliers remove a fixing clip and remove a drum of the lock from a door (15.6).
8. Installation is carried out upside-down removals.
Internal handle

15:3í Door lock Elements with the ordinary external handle
1 Casing
2 Laying
3 External handle of a door
4 Casing
5 Laying
6 Glass
7 Fastening
8 Lock
9 Door lock drive
10 Basis
11 Internal handle
a) Models with electronic window regulators
1   Panel of finishing and protective film
2 Button
b) Models with mechanical window regulators
1   Panel of finishing and protective film
2 Button



9. Turn off fixing screws (15.3a and 15.3b).
10. Remove the handle from a door.

15.11a On the Precis 1988 and 1989 models of year of release before an inhaling of screws adjust position of the handle so that it rose on 48 ° (distance And)



15.11b Turn off screws and move the handle if it is necessary, for adjustment of a free wheeling



11. Installation is carried out upside-down removals. Adjust the handle course before an inhaling of fixing screws (15.11a and 15.11b).
External handle
12. Disconnect connecting drafts from the handle.
13 Turn off fixing nuts from the inside of a door and remove the handle.

15:14 Disconnect draft for adjustment of a free wheeling of the external handle
1. Clip
2. Draft of the external handle



14. Installation is carried out upside-down removals. Check and adjust a free wheeling of the handle if it is necessary (15.14)