1. Remove the panel of finishing of a door. Disconnect wires and remove them.

2. Establish a jack or a support under a door.

3. Make marks around fixing bolts of loops.

4. Turn off fixing bolts of loops and remove a door. Installation is carried out upside-down removals.

12:5á The Wrench of a special form can be necessary for untwisting of bolts of fastening of loops to a body at adjustment of situation doors

12:5í Adjust the provision of a latch, having turned off fixing screws and having moved a latch as it is necessary

5. After installation of a door adjust its position and the provision of a latch of the lock (12.5a and 12.5b).