13:22. The pump of system of hydrostrengthening of steering - removal and installation
1. Disconnect a wire of the minus plug of the accumulator.
2. Weaken a tension of a driving belt of the pump and take off a belt.
3. Pump out hydraulic liquid from a tank.
21.4 For removal of the pump of system of hydrostrengthening of steering turn off a nut of connection of a tube of high pressure (1), disconnect a hose of the return pipeline (2), remove an arm of a tube of high pressure (3) turn off an adjusting bolt (4) and a hinged bolt (it is not visible in the photo) (the Precis model is shown)
|
4. Disconnect hydraulic tubes from the pump (21.4). Remove an arm of a tube of high pressure from the pump.
5. Turn off an adjusting and hinged bolt (21.4) and remove the pump.
6. Installation is carried out upside-down removals.
7. Pump over system of hydrostrengthening of steering.