03bf454c

13:14. The shock-absorber of a back suspension bracket - removal and installation

1. Lift the car and remove a wheel.

12.2 Turn off the lower fixing bolt and a nut of the shock-absorber (it is specified by an arrow)



2. Establish a jack under the lever of a suspension bracket and lift it so to take off a part of pressure of a spring of the shock-absorber. Turn off the lower fixing bolt of the shock-absorber (12.2).

12:3í Fixing bolts of the shock-absorber of a back suspension bracket (are specified by shooters) are located near a luggage carrier wall




13.3 On the Precis model two keys are necessary for untwisting of the top fixing bolt and a nut



3. Turn off a nut and a bolt of the top fastening (13.3 and 12.3b) and remove the shock-absorber.
4. Installation is carried out upside-down removals.