12:15. Ropes of the emergency brake - replacement

1. Remove the central console.
2. Turn off an adjusting nut of the removed rope.
3. Lift a back part of the car and remove a back wheel.
4. Remove the brake drum and blocks.
5. Disconnect a rope from the lever on a brake.

14.6 Remove an E-shaped clip and stretch a rope through a brake guard

6. Remove an E-shaped clip, the fixing rope to a guard of a brake (14.6) and stretch a rope through a guard.

14.7 Elements of fastening of a rope of the emergency brake
1. Not
it is used
2. Lock-nut
3. Adjusting nut
4. Balance weight
5. Forward rope
6. Switch of an alarm kidney of lamas of the emergency brake    
7. Lever of the emergency brake
8. It is not used
9. Clip
10. Plug
11. End of a rope
12. E-shaped clip
13. Back rope

7. Get a rope from clips on the longitudinal lever of a suspension bracket (14.7).

14.8 Remove back sitting and unbend a carpet for receiving access to clip bolts (are specified by shooters) - turn off only a bolt, the fixing removed rope (the Precis model is shown)

8. Remove back sitting. Lift a carpet, turn off a bolt of a clip and get a rope from a clip (14.8). Stretch a rope in salon.
9. Installation is carried out upside-down removals. After completion of installation adjust the emergency brake.