03bf454c

12:14. Manual

13. The emergency brake - adjustment
1. Check the course of the lever of the emergency brake. It should not rise more than by 5-7 clicks. Otherwise adjust the emergency brake.
2. Remove the central console.

13:3á On some models adjusting nuts of ropes of the emergency brake are located under the central console - at adjustment of ropes, turn both adjusting nuts (are specified by shooters) equal quantity of turns (the Precis model is shown)


3. Tighten up adjusting nuts on the balance weight so to receive the required course of the lever of the emergency brake (13.3a, 13.3b).

13:3í On other models ropes of the emergency brake are regulated by means of one nut.



13:4á On some models for adjustment of the switch of an alarm bulb of the emergency brake turn off the fixing screw (it is specified by an arrow) and move the switch as it is necessary (the Precis model is shown)



13:4í On other models for adjustment of the switch turn in the uvula established on the switch (it is specified by an arrow) (Galant model)



4.  If it is necessary, adjust the switch of an alarm bulb of the emergency brake. For this purpose turn off the fixing screw of the switch and move the switch up-down as it is necessary, or turn in a uvula (13.4a, 13.4b). After adjustment of position of the switch, reliably twirl the fixing screw.
5. Lift a back part of the car and twist wheels, having checked that brakes did not interfere them with rotation.