1. Disconnect a wire of the minus plug of the accumulator.

2. Turn off an adjusting nut.

5.3a the Rope fastens to the fork lever by means of a pin and checks - after their removal, it is possible to remove a braid of a rope and the plug

3. Get a rope braid from an arm and disconnect a rope from a coupling pedal (5.3a and 5.3b)

5.3b Disconnect a rope from a coupling pedal

4. Get a rope through a back wall of a motive compartment.

5. At installation grease the ends of a rope with multi-purpose grease. Installation of a rope is carried out upside-down removals.