10.5. Fastenings of the transmission - check and replacement
4.1 Try to shake fastening of the transmission by means of the big screw-driver
1. Insert the big screw-driver or ломик between fastening and an arm of the transmission and try to shake fastening (4.1).
2 The arm should not depart from fastening If is not present, replace fastening
3 For replacement of fastening establish a jack under the transmission, turn off a nut and get a through bolt, and also turn off bolts of fastening of an arm to the transmission, then remove fastening
4 Installation is carried out upside-down removals